Clavicula chair (2016) “This cabinetmakers chair is a remake of the very first chair I made as an cabinetmaker apprentice in 1999 (Ode to H.J.W.). The first chair I made by hand – at that time the CNC technology was not as developed as it is today, and I wanted to re-create the design with […]
Water Lily Work Desk (2018) Water Lily table is a work desk. The small collar profile gives a direction to the tabletop – it holds items from falling of the sides, and the front is a soft meeting to the seated. This detail has been crafted by using a CNC milling machine. CNC made wood
Water Lily work desk Read More »
Water Lily stool/side table (2015) This small furniture piece can both be used as a stool and as a side table. The small collar profile gives a direction on the round form. As a seat the collar indicates where to sit, a reminiscence of an tractor seat or a milking stool. The collar design gives
Waterlily stool/side table Read More »
Sit Up Straight (2021) Can a piece of furniture teach etiquette an proper manners?This chair eliminated the safety net and thus requires the user to consider their posture. The sitter can not expect to be supported, but has to pay attention to their way of sitting.Has the school of hard knocks had its time? Should
Sit Up Straight chair Read More »
Wooden Spoon chair (2008) This dining chair is based on the classic Nordic stick chair or Windsor chair. The characteristics of the chair are the 6 sticks which are not attached to the seat, but penetrates through it and rests in the rung that brings together the hind legs. Scandinavia has a tradition for stick
Wooden Spoon chair Read More »
Water Lily Mirror (2018) Water Lily mirror contain the same detail as the rest of the Water Lily collection. The small collar profile can be extended in the bottom thus adding a shelf for small items. This detail has been crafted by using a CNC milling machine. CNC made wood enables you to make a
Snowshoe chair (2010) This easy chair was designed for The Cabinetmakers’ Autumn Exhibition “Whiteout”. The design has references to both the nordic cabinetmakers classic chairs from the 1950-60ies, but also the Wiener bentwood chair which Thonet have perfected for many years. The chair’s challenge is the two bent poles that form the backrest. Prototype made of
Snowshoe easy chair Read More »
Anamorph Sand Dune chair (2020) A mirror reflects reality. Sometimes the mirror tricks us and distorts reality. In this case, however, the mirror shows the distorted product´s true form.Sand Dune chair is a dining chair with round legs and a cross frame. The double-curvature back gives the chair a light, floating expression. Model made of
Anamorph Sand Dune Chair Read More »
Final project (2009) The dining set was my final project from The Danish Design School. Inspired by the gourmet restaurant Noma in Copenhagen. Dining chair made of smoked oak, seat upholstered with woven horse hair and shell covered with salmon leather.
Riverstone Table (2009) 3 legged dining table. The tabletop has a slight organic shape. My intention was to arouse the user’s understanding of a geometric round shape. The shape is not geometrically round, alluring because it is organic and is experienced differently depending on perspective. In addition, the table top has a smooth profile and
Sand Dune Chair (2009) Light dining chair made in wood and plastic shells. Back rest is casted from a mold and attached to back legs to give a light and floating expression. This chair is the result of the development proces from the Dune lounge chair series. Prototypes made from ash and fiberglass shell. Upholstered version
Dune arm chair (2009) Extension of the Dune lounge series.“With this lounge chair series I wanted to combine the classic cabinetmakers furniture with shapes and references from the nature, a soothing and gentle immersion you can rest in for a while.” Fiberglass and oak. Construction of cylindrical legs and X-form stretcher.
Dune Low lounge chair (2008) “With this lounge chair series I wanted to combine the classic cabinetmakers furniture with shapes and references from nature, a soothing and gentle immersion you can rest in for a while.” As given by the name, these easy-chairs should forward the feeling of sitting on a sand dune. To feel
Dune Low lounge chair Read More »
Dune Medium lounge chair (2008) “With this lounge chair series I wanted to combine the classic cabinetmakers furniture with shapes and references from the nature, a soothing and gentle immersion you can rest in for a while.” As given by the name, these easy-chairs should give the feeling of sitting on a sand dune. To
Dune Medium lounge chair Read More »
Dune High lounge chair (2008) “With this lounge chair series I wanted to combine the classic cabinetmakers furniture with shapes and references from the nature, a soothing and gentle immersion you can rest in for a while.” As given by the name, these easy-chairs should give the feeling of sitting on a sand dune. To
Dune High lounge chair Read More »
Arch Side Table (2011) The construction of this side table is made of 3 equal pieces of bent veneer. Each piece is casted in a mold in which the veneer is bent and twisted 120°. The 3 pieces are then glued together and this arch structure occurs. This is a structure with references to vaults
Lønstrup Work Desk (2013) A small work table with turned legs and a drawer. The curves in the table’s details are inspired by the dune landscapes of the North Sea. An elevation of the worktop edging in one corner provides a frame that can be used as a paper document tray. The frame measure is based on
Lønstrup work desk Read More »
Water Lily console (2018) Water Lily console is a shelf or display for special items. The small collar profile gives a direction to the shelves – it holds items from faling of the sides, and the front is a soft meeting. This detail has been crafted by using a CNC milling machine. CNC made wood
Water Lily console Read More »
Megingjörð sofa (2010) Rooted in a nordic simplicity and aspiring to design furniture from Scandinavian 50’s joinery sophistication, this project began with a wish to make a comfortable sofa furniture without it being as bulky or inflexible as many typical sofa types. The base consist of a classic bench/daybed adding a moulded backframe belt which
Bo bookcase / dollshouse (2013) This furniture can be used as both bookcase, dollhouse or storage / display of special items. The base of the boxes on the two variants – the “villa” and the “high tower” – are the same, one is laid down, the other is raised. At the top is attached a
Bo bookcase/dollhouse Read More »
Riverstone plate (2015) The plate uses the same slight organic shape as the Riverstone tabletop. My intention was to arouse the user’s understanding of a geometric round shape. The shape is round, alluring because it is organic and is experienced differently depending on perspective. The plate can be used for decorative purposes. Prototypes made at
Twist chair (2008) Chair for reading and resting. Upholstered pipe construction. Designed in cooperation with textile designer Morten la Cour. A backrest, seat or protective shelter, Twist chair is something that would make an amazing accent seat for a bedroom or livingroom. A creative addition to circular or curvilinear interior themes, the fabric choice, by
Threshold hallway furniture (2017) The entrence is the first room you meet in a home. But often this area is dominated by shoes, outerwear and other accessories. The entrance, often a narrow hallway and limited in space, can be a challenge to perform the daily routine of getting out the door in the morning or
Threshold hallway furniture Read More »
Savoiardi – room devider (2017) Room devider made of solid elm wood and upholstered frames. One side with white and the other side with blue textile from Kvadrat. Four frames assembled with brass hinges. Prototype made for Skud På Stammen exhibition in 2017 by cabinet maker Kristinna Niikanoff.
Savoiardi room devider Read More »
Mjølner (2006) Light dining chair. The name Mjølner (Mjolnir) refers to the hammer of Thor, the norse god. Mjølner was used as a weapon and to create thunder and lightning. The prototype is made of oak and brown leather. Designed and made in collaboration with Camilla H. H. Larsen.
Ode to H.J.W. chair (1999) My very first chair as cabinetmaker’s apprentice. I have for a long time admired and respected the work of Hans J. Wegner and this chair was my first attempt to walk in his foot steps. It started with a paraphrase over the backrest of Wegners PP502 office chair. Prototype made
Ode to H. J. W. chair Read More »
Scar chair (2012) “The idea for the chair started with a desire to utilize wood discarded from production at Junckers, a company specialized in wooden flooring. The panels used for Junckers floor production measures 600 x 70 x 23 mm and I used them as “building blocks” for this project. The second grade timber contained
Suitable valet stand (2008) Suitable is for the businessman running a hectic schedule whilst not having a lot of furniture or having a big office. The board uses minimal space when not in use and should he have to ‘burn the midnight oil’ at the office, Suitable folds out and leans up against a wall.
Suitable valet stand Read More »
Facet boxes (1999) Square boxes for storage of small items. Lid can be turned and fliped either way.Inside of box and one side of lid can be painted to make a surprising effect. Prototype made in oiled oak.
Fnubbu hanger (2007) A delicate hanger for light objects such as a scarf, hat and other light accessories. 8 mm wire with bended branches welded on the trunk. Painted wooden knobs (35 mm diameter) are attached at the end of every branch. Inspired by shapes and products from the 1950-60ies. Prototype made of powder coated 8
